- New
No supplier
Banner
The Konica Minolta KM HS2000 printhead is a piezo on-demand printhead featuring an all-nozzle Independent drive system with a multi-line structure. It can be used as a replacement of the KM1024i SHE 6PL printheads.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
The Konica Minolta KM HS2000 printhead is a robust, shear mode, piezo on-demand printhead featuring an All-nozzle Independent Drive System with a Multi-line Structure. In contrast with the existing 3-cycle system drive, an independent drive system that enables simultaneous emission from all 1024 nozzles has been adopted. The high-density structure featuring 4 lines of 256 nozzles aligned with high precision enhances positioning accuracy to realize high-definition print quality. The Konica Minolta HS2000 printhead offers a Maximum Drive Frequency of 60kHz, approximately 3 Times greater than that of the KM1024 Series, which makes it the ideal inkjet printhead for development of single-pass system inkjet printers capable of high-speed printing. The Konica Minolta KM HS2000 printhead can be used as a replacement of KM1024i SHE 6PL Printheads.
Environmentally-considerate Approved Green Product
The Konica Minolta KM HS2000 printhead incorporates only approximately one-third of the petroleum-derived materials and toxic chemicals used in the current KM1024 Series. In addition, the nozzle unit surface area is the same as that of the KM1024 Series.
We recommend to change the head cables when installing a new printhead.
Specifications
• Technology: Piezo Drop On-Demand
• Native Resolution: 360 dpi
• Cal. Droplet Size: 6 pl
• Max. Drops in Greyscale: 8 drops
• Tot. Amount of Nozzles: 1024 (256 nozzles per line)
• Print Width: 72 mm
• Typical Firing Frequency: 50 Khz
• Max Firing Frequency: 60 kHz
• Ink Compatibility: UV Inks
• Heater: integrated
• Dimensions: W131mm x D18mm x H94mm
• Weight: Approx. 150g
This printhead carries a manufacturer warranty. Country of origin : Japan
Brand: Roland
The manufacturer has discontinued this product. Please scroll down for more information below. SKU: 22805293 Manufacturer part number: 84439910
Brand: Mutoh
This generic carriage motor with pulley is suitable for Mutoh ValueJet 1624 printers. SKU: PMOMU43182
Brand: Vutek
This FS Kit, Encoder and Bracket, QS is suitable for the VUTEK QS-series printers. Its design includes dual bearings and shaft seals for NEMA 4, 13 and IP65 environmental ratings, a rugged metal housing, and a sealed connector or cable gland. This is the original VUTEk part (Part Number 45071849, replacing part P5929-A). SKU: 1724-1204-ND Manufacturer...
Brand: CAB
CAB 5954077 Printhead OEM for Model 4+/600 Brand: CABModel: 5954077 Product Condition: NewOEM 5954077 CAB Model 4+ Thermal Printhead 600 dpi
Brand: Agfa
This Jeti 3312 Board, Motion Module - 390-002010 is suitable for Agfa printers. SKU: 390-002010 Manufacturer part number: 390-002010
Brand: Konica Minolta
The Konica Minolta KM512 LN print head is compatible with oil based, solvent and UV inks. SKU: PPHKM512LN
Brand: Mimaki
This set of carriage cables assembly connect from the slider board to the main board on Mimaki JV3 250SP printers. This is the original Mimaki part (part number E102371). This set of carriage cables is 454.5cm long and 5.1cm wide. Each cable has 40 pins. SKU: E102371 Manufacturer part number: E102371
Brand: Printronix
Part Number: 251244-001Print Resolution : 300 DpiPrintronix 251244-001 - Printronix T5304e Thermal Printhead 300 Dpi
Brand: Roland
This MOTOR,DM5030(07SGN)+4GN180B TW is suitable for Roland SJ-1045EX printers. This is the original part (number 1000002056). SKU: 1000002056 Manufacturer part number: 1000002056
Brand: Datamax-O'Neil
Part # PHD20-2246-01
Brand: Xaar
This Xaar Omnidot 760 printhead is suitable for Mutoh Zephyr 65 / Zephyr TS printers. The Xaar Omnidot 760 provides the optimum in flexibility, quality, reliability and speed. Based on Xaar’s unique patented multi-pulse greyscale technology Xaar 760 is user-definable and delivers a choice of binary or dynamic variable drop sizes, ranging from 8pl to 40pl.
This Main Vacuum Sensor is suitable for Inktec Jetrix 3015FQ & Jetrix 2513FRQ printers. SKU: ZSE40A-C6-R Manufacturer: Inktec
There are no available reviews. Write your review.
There are no available questions. Ask your question.
The Konica Minolta KM HS2000 printhead is a piezo on-demand printhead featuring an all-nozzle Independent drive system with a multi-line structure. It can be used as a replacement of the KM1024i SHE 6PL printheads.